Audio editor free, in your browser
Edit and fix speech or music online. It works as a free music editor and as a repair tool for voice. Cut mistakes, move clips, repair a noisy section and mix up to four tracks on a waveform timeline. Put music under a voice and have it duck automatically. Everything runs on your device, then you download a WAV or MP3. Your original file stays unchanged.
Audio is never uploaded. Closing the tab discards unsaved edits; an explicit checkpoint stays on this device until deleted or cleared by the browser.
What to expect
- Cost and privacy
- Free, with no account. Processing runs on your device; your audio is never uploaded.
- Use it for
- Cut, split, move and fade clips, crossfade overlaps, mix up to four tracks, duck music under a voice automatically, and repair a selected section.
- Inputs
- Mono or stereo WAV, MP3, M4A or MP4 when your browser can decode the audio.
- Downloads
- 16-bit WAV or a new 192 kbps MP3. Audio only; original tags and video are not kept.
- Limits
- Up to five minutes and 50 MB per recording, subject to session memory. Selected repair is up to 30 seconds.
- Keep in mind
- Selected repair covers noise, hum, wind and quiet speech. Microphone recording and effect plugins are not available.
How to edit audio here, in five steps
- STEP 01
Choose a file
Drop a WAV, MP3, M4A or MP4 recording under five minutes and 50 MB onto the editor, or try the sample. It decodes on your device; nothing is uploaded.
- STEP 02
Place the playhead and split
Click or drag the ruler to seek, or press Space to play. Put the playhead where a mistake begins and press S to split. Drag across a waveform to select a range; Split then cuts at both ends at once.
- STEP 03
Delete, keep or move
Delete removes the clip or range and leaves its gap. More offers Delete, close gap and Keep range only. Drag a clip header to move it, its edges to trim, and the corner controls to fade. Cmd/Ctrl+Z undoes any step.
- STEP 04
Repair only what needs it
Select a noisy clip or range and open Repair to reduce noise, hum or wind or raise quiet speech, compare Before and After, then set the Amount. Tracks holds names, gain, Mute, Solo and Duck under for up to four tracks, and Add recording places another file at the playhead.
- STEP 05
Export WAV or MP3
Choose Export for a 16-bit WAV editing copy or a 192 kbps MP3. The download is the mix of every track at its gain, fades and Mute/Solo state. Master volume does not change it.
How the editor works
Every clip points to a range of your original recording. Splitting, trimming or moving a clip changes those references; nothing rewrites your file until you choose Export. Undo and redo keep a bounded history of edits without copying the audio for every action.
The browser decodes your recording locally. Waveform peaks, repair and export run in a Worker on your device, so nothing is uploaded and the page stays responsive while those jobs run. The timeline holds up to four tracks, each with a name, gain, Mute and Solo. A music track can duck under a voice track, so the music drops while someone talks and comes back in the pauses. Clip gain, fades, track levels and ducking go through the same renderer for preview and download before encoding. Master volume changes only what you hear.
Repair works on a selected clip or range rather than the whole file: check loudness and peaks, review proposed cuts in quiet gaps, or reduce noise, hum or wind and raise quiet speech with Before/After and an Amount control. WAV export is 16-bit PCM. MP3 is a new 192 kbps encode and may add encoder padding. Both contain audio only, without original tags, artwork or video.
Keyboard shortcuts
| KEYS | ACTION |
|---|---|
| Space | Play or pause |
| S | Split at the playhead, or at both ends of a selection |
| Delete or Backspace | Delete the selected clip or range and keep its gap |
| Esc | Clear the selection or cancel a drag |
| Cmd/Ctrl+Z | Undo |
| Shift+Cmd/Ctrl+Z | Redo |
| Left and Right arrows | Nudge the focused playhead, trim edge or fade; Shift moves a second, Alt one sample |
| Home and End | Jump the focused ruler to the start or end of the recording |
What it does not do yet
- Each recording is under five minutes and 50 MB; high sample rates have a smaller memory limit. Add more recordings one at a time with the same limit and a shared memory check.
- Selected repair covers noise, hum, wind and quiet level on a selection up to 30 seconds. Wind repair can thin a voice; compare Before and After. Echo, muffled, distorted and one-ear repairs run on whole files in their own fixers.
- It does not record from a microphone, host effect plugins, export video or keep projects in the cloud. A checkpoint lives in this browser only.
- Exports are 16-bit WAV or 192 kbps MP3. FLAC, AAC and lossless MP3 frame copying are not available.
- Export stops if the rendered mix has samples above full scale. Lower clip or track volume and retry; Master changes listening level only. This guard does not repair clipping already in the source or guarantee codec true-peak headroom.
Questions
Is the audio editor free?
Yes. Editing and WAV/MP3 export are free, with no account. Processing runs locally; the tool never uploads your recording.
Can I edit MP3 or M4A?
Yes, when your browser can read the duration and decode the codec. WAV export avoids another lossy encode. MP3 export makes a new 192 kbps file; it does not copy compressed frames directly.
Why does export say the mix is too loud?
An overlap or a volume increase can push the mix above full scale even when each source sounds fine on its own. Export stops rather than flattening those peaks in the download. Lower clip or track volume, then export again. Master volume only changes playback. Your clips and edits stay in place, and no automatic normalization is applied. Measure the finished file if your destination has a true-peak limit.
Can I join or mix several recordings?
Yes. Add a recording to any of four tracks at the playhead, so files can follow each other on one track or overlap on different tracks. Each file must be under five minutes and 50 MB, and the session checks shared memory before decoding. Mono clips play in both ears of a stereo mix. A stereo addition makes a mono mix stereo; Undo removes the addition. Track gain, Mute and Solo also affect downloads.
How do I crossfade two clips?
Overlap the end of one clip with the start of the next on the same track, then select either clip. The overlap row inside the timeline offers Crossfade, which installs an equal-power fade out and fade in as one undoable edit. The same curves are used for playback and export. They remain attached to the clips when moved or split; reapply after changing the overlap. Similar sounds can get louder through the join, so lower clip volume if needed. Contained clips and overlaps with a third clip do not offer this two-clip control.
How do I put music under a voice?
Put the voice on one track and the music on another. Open Tracks, and on the music track choose Duck under and the voice track, pick Podcast bed (12 dB), Gentle (6 dB) or Hard (18 dB), then Apply duck. The music drops whenever the voice is talking and comes back about half a second after it stops. It starts dipping just before the first word, so nothing gets covered. Muting or soloing tracks to listen does not move the dips, and the download ducks exactly like the preview. Undo turns it off.
How is this different from the audio trimmer?
The trimmer keeps one time range of one file. The editor makes many cuts in one project, moves clips, fades, mixes tracks and repairs a selected part, with undo for every step. Use the trimmer for a quick excerpt and the editor for an edit.
Does the waveform need a mouse?
No. Focus the timeline ruler and use arrow keys to seek, Shift for a second or Alt for one sample; Home and End reach the recording boundaries. Move, trim and fade controls also accept left and right arrows. The clip menu and labelled time fields offer a clickable alternative to dragging. Open Precise position beside the timeline for a numeric playhead and range boundaries in exact samples. Range offsets are relative to the selected clip. Undo, redo and transport have buttons and keyboard shortcuts.
Does it work on a phone?
The layout fits a 390 px screen with no horizontal scrolling. Playback and editing buttons have targets at least 44 px tall, and the waveform accepts touch dragging. Use Fit clip to reach the handles of a tiny clip. Exact cuts are easier with a keyboard; we have not benchmarked older phones, and five-minute files use real memory on a small device.
Will it save my project after a reload?
Only if you choose Save checkpoint on this device. It keeps one checkpoint of the source audio, both repair versions, tracks and clip edits in this browser, up to 64 MiB of source audio. New edits need another save, which replaces the previous checkpoint. Resume it from the empty editor. Undo history and listening volume start fresh. Delete saved checkpoint removes it; browser storage can also be cleared. Keep your originals and download your finished audio.